• perfectly white, perfectly smooth
• for application with a roller - easy, even and uniform application without splashing
• perfect consistency for application and top coat shaping
• no dusting – clean and safe wet sanding
• for manual and machine sanding

• for any type and size of tiles – ceramic, stone, glass, etc.
• for particularly difficult substrates: old tiles, terrazzo, plasterboards, OSB and damp proofing
• the widest range of use: on floor heating, terraces, in swimming pools
• no slip even in case of mega large cladding

The main characteristics- foot traffic and grouting just after 2 hours
- for installation of ceramic and natural stone tiles, porcelain-gres and mosaic
- for application in communication routes, bathrooms, balcony and terraces
- perfect spread and no slip even with large tiles
- for critical substrates e.g. old tiles, terrazzo, plasterboards, damp-proofing, floor heating, concrete and OSB
- wide range of mix water – consistency adjusted to the needs
- 2 up to 15 mm layer - for floating, thin- and thick-coat application
- application in temperatures from +5°C up to +35°C

The main characteristics• for small and medium size ceramic tiles, incl. gres-porcelain ones
• reduced slip
• layer thickness 2-10 mm
• for indoor and outdoor use

•  
• Steel, galvanized mixer
• Round rod - ø 8mm (1207), ø 10mm (1208)
• For stirring mortars, plasters and adhesives

•  
• Steel, galvanized mixer
• Round rod - ø 10mm
• For stirring mortars, plasters and adhesives

• perfectly white, perfectly smooth
• for application with a roller - easy, even and uniform application without splashing
• perfect consistency for application and top coat shaping
• no dusting – clean and safe wet sanding
• for manual and machine sanding

Deep-penetrating priming emulsion

Deep-penetrating priming emulsion

DUSTLESS FINISHING COAT

LAYER THICKNESS 1-10 MM

FOR WET TREATMERNT

FOR MANUAL AND MACHINE APPLICATION