• for any type and size of tiles – ceramic, stone, glass, etc.
• for particularly difficult substrates: old tiles, terrazzo, plasterboards, OSB and damp proofing
• the widest range of use: on floor heating, terraces, in swimming pools
• no slip even in case of mega large cladding

• Ergonomic, balanced, shaped handle made of beech wood on tarnamid jacking foot.
• Stainless, acid-resistant steel, thickness: 0,7mm, mirror polished, ground edges, (secured and covered), rounded edges.

• Ergonomic, balanced, shaped handle made of beech wood on tarnamid jacking foot.
• Stainless, acid-resistant steel, thickness: 0,7mm, mirror polished, ground edges, (secured and covered), rounded edges.

The main characteristics- foot traffic and grouting just after 2 hours
- for installation of ceramic and natural stone tiles, porcelain-gres and mosaic
- for application in communication routes, bathrooms, balcony and terraces
- perfect spread and no slip even with large tiles
- for critical substrates e.g. old tiles, terrazzo, plasterboards, damp-proofing, floor heating, concrete and OSB
- wide range of mix water – consistency adjusted to the needs
- 2 up to 15 mm layer - for floating, thin- and thick-coat application
- application in temperatures from +5°C up to +35°C

• due to the carefully selected angle during the finishing work, it's possible to get a perfect 90* angle of the wall
• the working part has been made from one piece of flexible steel 0,5mm thick
• ergonomic handle made from beech wood
• for finishing work, mainly for plasters in the internal corners

• due to the carefully selected angle during the finishing work, it's possible to get a perfect 90* angle of the wall
• the working part has been made from one piece of flexible steel 0,5mm thick
• ergonomic handle made from beech wood
• for finishing work, mainly for plasters on external corners

The main characteristics• for small and medium size ceramic tiles, incl. gres-porcelain ones
• reduced slip
• layer thickness 2-10 mm
• for indoor and outdoor use

The ATLAS M-system 3G disc anchors are used for:
- fixing plasterboards, boards made of wood-based materials, cement fibre boards, ALUCOBOND boards, FARMACEL boards to walls, ceilings and inclined attic walls,
- installation of casing of ventilation and installation shafts, suspended ceilings of different heights etc.

Main properties

·         made of polypropylene or steel

·         stable fixing of plasterboards to walls, ceilings and slopes

·         easy-to-install point fixing

·         quick progress of installation

·         smooth adjustment of distance and inclination angle

·         do not require substrate levelling or hacking off

·         collision-free distribution of installations under plasterboard lining