Atlas Eskimo 0.25l Winter Accelerator

setting accelerator for renders and paints

£12.00
Tax included

Product description

Enables rendering and painting in the temperature of 0°C– recommended during façade works in lower temperatures (0 – 10°C) and high air humidity (above 80%).

Main properties

enables rendering and painting at 0°C

enables rendering and painting in high air humidity (above 80%)

accelerates the coat setting time

gives early resistance to rain

neutral to other properties of the material

Main parameters

mixing proportions: 1% of weight, i.e. up to 0.25 kg (the whole bottle) for 25 kg of render and up to 0.15 kg (3/5 of the bottle) for 10 l of paint.

density: ca. 1.1 g/cm³

TYPES OF MODIFIED MATERIALS:

− ATLAS ACRYLIC RENDERS

− ATLAS SILICATE RENDERS

− ATLAS SILICONE RENDERS

- ATLAS DEKO M MOSAIC RENDERS

− ATLAS ARKOL E AND ATLAS SALTA E ACRYLIC PAINTS

− ATLAS ARKOL S SILICATE PAINTS

− ATLAS FASTEL NOVA AND ATLAS SALTA SILICONE PAINTS

PROPERTIES

Accelerates water evaporation from the applied render or paint – accelerates the first setting stage of dispersion products – water evaporation from the applied material. Therefore, the second stage, consisting in binder setting and drying, can start earlier – the applied material becomes resistant to rapid temperature drop and precipitation earlier (already after about 6 - 8 hours).

Easy to use – it is a ready-to-use additive added to the material directly before its application on the façade, easily mixing with the rendering mass or the paint.

Neutral to other properties of the material – does not lead to deterioration of durability or functional parameters after setting.

No change in the colour of the ready-to-use render or painting coat.

TECHNICAL DATA

ATLAS ESKIMO is a yellow liquid with smell of the ammonia.

RELATIVE DENSITY

CA. 1.1 G/CM³

Temperature of use

from 0°C to +10°C

The product is not classified as a construction material.

APPLICATION

The product is to be added to the render or paint directly before their application. It is recommended to observe the proportion of 1% weight, i.e. up to 0.25 kg (the whole bottle) for 25 kg of render and up to 0.15 kg (3/5 of the bottle) for 10 l of paint. After careful manual mixing, the material can be applied.

IMPORTANT ADDITIONAL INFORMATION

• The substrate for the render or paint cannot be frozen. Recommended working and drying temperature is from 0°C to +10°C. The freshly applied material becomes resistant to precipitation after about 6 – 8 hours, depending on the ambient temperature and humidity.

• The tools must be cleaned with clean water directly after use.

•Danger. Contains the water ammonia solution CAS 1336-21-6. Causes skin irritation. Causes serious eye damage. Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water with soap. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. Immediately call a posion center or a doctor. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Proceed according to the Safety Data Sheet.

TRANSPORT & STORAGE

•Keep in tightly sealed original and labeled containers. Keep in dry and cool places, protect against overheating (> 30 °C) and freezing. Protect against direct sunshine, heat sources, sparkles, flame. Shelf life in conditions as specified is 18 months from the production date shown on the packaging.

PACKAGING

Unit packaging: plastic bottle of 0.25 kg

CAUTION

The above information constitutes basic guidelines for the application of the product and does not release the user from the obligation of carrying out works according to engineering principles and OHS regulations.

You might also like