Nature MADRYT

PRICE LIST EXCL VAT | INCL VAT
prices for a doof leaf, frames sold separately

models	Natural Oak Veneer	Natural Oak Satin Oak
solid	503.41 | 604	519.40 | 624
small glazing	514.07 | 617	530.06 | 636
muntin	523.67 | 628	539.66 | 648
large muntin	534.33 | 641	550.32 | 660

Get in touch to order:

Sheffield: 0114 247 1468

Leeds: 0114 247 1468

Birmingham: 0121 360 5384

Northampton: 0160 463 3383

We are happy to advise and help you choose the best doors for you.

DOOR LEAF CONSTRUCTION

Glued softwood with MDF. The construction is finished with Natural veneer. Thanks to applied technology, door leaf is very resistant to deformations. Surface is protected by ecological water-based varnishes. Natural Oak and Satin (apart from white) veneers are hardened under UV lamp (semi-matt). CORDOBA minimalist rails and stiles chamfered with 20°

ACCESSORIES INCLUDED IN THE DOOR LEAF PRICE

• Rebated doors: three standard barrel hinges or PRIME hinges; non-rebated: two 3D hinges
• Lock with glossy faceplate (silver or gold): key lock, WC lock,
  or cylinder lock
• Glass panel – ‘chinchilla’ or frosted tempered glass
• preparation for shortening, maximum 60 mm. A door leaf with a ventilation slit – shortening up to 40 mm A door leaf with a ventilation slit – shortening up to 40 mm
• Round pull handle (for sliding doors)
• A seal fi tting the glass panel

DOOR FRAMES

Recommended rebated door frames:

• PORTA SYSTEM
• MINIMAX

Rekomendowane ościeżnice bezprzylgowe:

• PORTA SYSTEM ELEGANCE
• PORTA SYSTEM ELEGANCE 90 degrees

Veneer

Due to the characteristic of Natural veneers, differences in colour and graining, might appear on a door leaf. These differences cannot be grounds for complaints.

EXTRA CHARGES

• special order an astragal for double doors
• Satin white oak finish
• an oblong pull handle for sliding doors
• hook lock with side pull handles (sliding doors)
• ventilation undercut
• size ‘100’
• third 3D hinge- silver, white, black (extra charge added to a door frame price)
• third 3D hinge – gold (extra charge added to door frame price)
• reinforcement for door closer – third hinge is required
• black lock and black barrel hinges
• black magnetic lock and black barrel hinges
• magnetic lock: white, black on non-rebated doors.
• magnetic lock with stainless steel faceplate
• gold 3D hinges (extra charge added to a door frame price)
• handle with an escutcheon

NOTES

• Norm PN EN 14351-2:2018-12.
• Norm PN EN 14351-2:2018-12.
• Unvarnished door leaves are available in a standard product price
• Ventilation sleeves- silver or gold. 1 row
• Double doors are available in any door leaf size combinations. For a double non-re bated door, ‚active’ and ‚passive’ door leaves must be ordered For a double non-rebated door, ‘active’ and ‘passive’ door leaves must be ordered.
• Magnetic lock is not available for a double door
• Side panels in size ‘40’
• PRIME or 3D hinges – packed with a door frame.

• SS total door leaf width (including rebates)
• HS total door leaf height (including rebate)
• DS door leaf thickness
• S0 width of a wall opening prepared for installation
• H0 height of a wall opening prepared for installation, measured from fi nished fl oor level

• OS opening width (for Alfa and Beta this dimension is decreased by the door leaf thickness)
• OW opening height (measured from fi nished fl oor level)
• SB door frame width without architraves
• HB door frame height, without architraves
• SZ total door frame width with architraves
• HZ total height of door frame, including architraves
• MS width of sliding door masking system
• MG thickness of a rail cover (sliding systems)
• BG thickness of a door stop (jamb) (sliding systems)
• TS/W acceptable width and height tolerance (wall opening)