PRICE LIST EXCL VAT | INCL VAT
prices for a doof leaf, frames sold separately
| models | UV Premium Plus Varnish |
|---|---|
| A | 339.79 | 408 |
| B,C,D | 364.83 | 438 |
| G | 378.16 | 454 |
AZURA handle, reeded glass in A.1 door
mirror – option available in A.1 door
Colours
Premium Plus UV Varnish 
Contact us to find out more and order doors. We are happy to advise and help you choose the best doors for you.
Sheffield: 0114 247 1468
Leeds: 0114 247 1468
Birmingham: 0121 360 5384
Northampton: 0160 463 3383
TECHNICAL INFORMATION
DOOR LEAF CONSTRUCTION
Frame and panel construction. The door leaves, depending on the design, consist of horizontal rails and frosted laminated safety glass with a thickness of 6 mm. Panels have a thickness of 6 mm, and in model A.0, 12 mm. Preparation for shortening up to 60 mm For the ‘100’ width option, a third hinge is required. FINISH
Model A.1 can be made with a mirror on one or both sides.
If the mirror is only on one side, there is a solid board on another side. It is possible to change the glass to transparent tempered glass 6 mm, or in model A.1, for an additional fee, to ribbed tempered glass 6 mm.
ACCESSORIES INCLUDED IN THE DOOR LEAF PRICE
- Rebated doors: three standard barrel hinges or PRIME hinges; non-rebated: two 3D hinges
- Lock with silver or glossy gold plate: key lock, WC lock, or cylinder lock
- Preparation for shortening (maximum 60 mm)
- Frosted, tempered glass
DOOR FRAMES
Recommended rebated door frames:
- PORTA SYSTEM
- MINIMAX
Rekomendowane ościeżnice bezprzylgowe:
- PORTA SYSTEM ELEGANCE
- PORTA SYSTEM ELEGANCE 90 degrees
- LEVEL
Recommended door frames with reversed rebate:
- PORTA SYSTEM with reversed rebate fi nished with Premium Plus UV paint
EXTRA CHARGES
- black glass panel – group G
- mirror on both sides
- mirror on one side
- size„100” 110”
- reverse rebate – additional charge for the door leaf
- reverse rebate – third 3D hinge, silver
- black lock and black pintle hinges
- reverse rebate – third 3D hinge, white or black
- silver, white or black third 3D hinge (extra charge added to a frame)
- third gold 3D hinge (extra charge added to a frame)
- undercut
- magnetic lock: white or black (only non-rebated doors)
- stainless steel magnetic lock
- gold 3D hinges (extra charge added to a frame)
- black lock and black pintle hinges
NOTES
- Norm PN EN 14351-2:2018-12.
- Double doors are available in any door leaf size combinations. For a double non-re bated door, ‚active’ and ‚passive’ door leaves must be ordered
- Magnetic lock is not available for a double door
- Size ‘100’ requires a third hinge.
- PRIME hinges or 3D hinges – packed with a door frame.
Door dimensions tables in CN standard
| Oscieznica Porta System CN | Ss | Hs | Ds | S0 | H0 | Os | Ow | Sb | Hb | Sz(6) | Sz(8) | Hz(6)/(8) | Ts/w |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 60 | 648 | 1985 | 40 | 685 | 2015 | 606 | 1971 | 650 | 1993 | 750 | 790 | 2043/2063 | +20 / +10 |
| 70 | 748 | 1985 | 40 | 785 | 2015 | 706 | 1971 | 750 | 1993 | 850 | 890 | 2043/2063 | +20 / +10 |
| 80 | 848 | 1985 | 40 | 885 | 2015 | 806 | 1971 | 850 | 1993 | 950 | 990 | 2043/2063 | +20 / +10 |
| 90 | 948 | 1985 | 40 | 985 | 2015 | 906 | 1971 | 950 | 1993 | 1050 | 1090 | 2043/2063 | +20 / +10 |
| 100 | 1048 | 1985 | 40 | 1085 | 2015 | 1006 | 1971 | 1050 | 1993 | 1150 | 1190 | 2043/2063 | +20 / +10 |
- SS total door leaf width (including rebates)
- HS total door leaf height (including rebate)
- DS door leaf thickness
- S0 width of a wall opening prepared for installation
- H0 height of a wall opening prepared for installation, measured from fi nished fl oor level
- OS opening width (for Alfa and Beta this dimension is decreased by the door leaf thickness)
- OW opening height (measured from fi nished fl oor level)
- SB door frame width without architraves
- HB door frame height, without architraves
- SZ total door frame width with architraves
- HZ total height of door frame, including architraves
- MS width of sliding door masking system
- MG thickness of a rail cover (sliding systems)
- BG thickness of a door stop (jamb) (sliding systems)
- TS/W acceptable width and height tolerance (wall opening)