USE
Exclusively for indoor use, in dry rooms, both on mineral substrates such as bricks, concrete, plaster, well-cured cement plaster, cement-lime plaster and plasterboard, as well as on previously painted substrates – acrylic paint coats characterised by an adequate adhesion to the substrate. In the drywall systems, the plaster is used as a finishing coat. CEKOL C-45 Finisz is especially recommended as a final coat before painting.
CHARACTERISTICS
CEKOL C-45 Finisz is a finishing plaster based on top-quality white raw materials, binders and modifiers. CEKOL C-45 Finisz is used for final surface smoothing prior to painting, and for obtaining decorative surfaces. Easy to sand by hand and by machine. The surface is white, smooth and easy to paint. Does not turn yellow when exposed to sunlight. After drying, the plaster can be painted with all types of paints. CEKOL C-45 Finisz is recommended for mechanical application with suitable machines and tools.
- Proportions of the mixture: 0.40 l of water for 1 kg of dry powder
- Application temperature +5 ÷ +30˚C
- Layer thickness: max. 3mm
- Consumption: approx. 1.5 kg/m²/mm
SUBSTRATE PREPARATION
The substrate should be clean, tight, free of grease. Oil paints, glue colours and loose grains of sand must be removed. Absorptive substrates should be primed with a deep penetrating primer.
PLASTERING
The mortar should be prepared by pouring 1 kg of powder to about 0.4 litres of water and mixing it thoroughly. The plaster prepared in such a way can be used within two weeks provided that it is stored in a sealed, air-tight container. Single layer thickness max. 3mm Another layer should be applied after the complete hardening and drying of the first layer.
STORAGE
Keep in the original packaging in a dry and dark place, away from sources of heat. Protect from excessive temperature and frost.