ZW 330 Rapid-set levelling mortar 25kg Atlas

SKU: 01062

£13.08

Highlights:

  • tiling after just 5 hours
  • no shrinkage cracks (fibre reinforced)
  • high mechanical strength
  • great under tiles, screeds, plasters

În stoc

Descriere

Description:

  • Repairing building substrates inside and out:
  • Making subfloors bonded to the subfloor.
  • Type of substrate to be repaired – cement and cement-lime plaster, concrete, aerated concrete, cement screeds, as well as unplastered brick and ceramic or silicate block walls.
  • • Type of finishing layer – ceramic tile cladding, plaster, thin layer plaster, floor panels, etc.

Main properties:

  • Allows a very quick start to subsequent work – under normal conditions, the tiles can be laid after approx. 5 hours (at a layer thickness of 5 mm).
  • by leveling up the surface prior to tiling or screed, the consumption of the more expensive products like tile adhesives can be reduced
  • perfect texture – the working parameters ensure easy application and the desired filling of cavities in the repaired surface.
  • Reinforced with polypropylene fibres that:
    – reduce cracks resulting from shrinkage during mortar setting,
    – allow thicker layers of mortar to be applied to vertical surfaces without the run-off effect,
    – the water is distributed evenly during drying
  • A wide range of layer thicknesses – from 3 to 30 mm in one pass – moreover, when mixed with quartz sand (grain size up to 2 mm) at a weight ratio of 1:4 (sand : dry mortar), layer thicknesses of 31 mm to 60 mm can be achieved (when filling cavities and levelling horizontal surfaces).

Main characteristics:
layer thickness: 3-30 mm
compression strength: min. 20,0 MPa

Consumption:
The average consumption is 15 kg per 1m2, for 10 mm thickness.

Informații suplimentare
Greutate 25 kg
Dimensiuni 53 × 26 × 9.5 cm