Description:
- Reinforces the top part of primed mineral substrates – penetrates into material structure, reinforces it and improves its load-bear capacity.
- Improves yield of paints, top finishes and adhesives – increases yield of materials used for the next layer, reduces their consumption by sealing structure of a primed substrate.
- Decreases substrate absorptivity – prevents excessive water absorption by the substrate.
- Unifies substrate absorptivity – product applied as the next layer has uniform setting conditions on the whole surface, including areas with small repairs.
- Bonds non-stable substrates – reduces dust on floors, screeds and plasters.
- Intended for application at high temperature – recommended for use at temperature from 5°C up to 30°C, indoors and outdoors.
Main properties:
- ATLAS UNI-GRUNT is a water-based primer with the finest quality dispersion of polymer resins.
- Very short drying time – depending on temperature and air humidity, application of next layers on a primed substrate is possible after:
– around 15 minutes – when using ATLAS adhesives,
– around 2 hours – self-levelling subfloors, paint on blocks and traditional lime-cement plasters - A very low VOC (volatile organic compound) contents, 15 times less than the norm
- colourless, solventless, water-based
- application by brush, roller or paint aggregate machine
- application temperature: from +5 °C to +30 °C
- drying time: 15 min / 2 godziny
Consumption:
Average consumption 0,05 – 0,2 kg per 1 m². The consumption depends on the substrate absorptiveness.