Description:
- Wide range of use – on single- and multi-family housing, industrial, public access buildings and outbuildings.
- Can be used as a decorative and protective coat – also upon surfaces exposed to high thermal and operation load.
- Recommended upon fresh renders – painting thin-coat mineral renders 5 days after their application.
Main properties:
- PEARL EFFECT – water absorbability reduced to a minimum – advanced technology based on silicone dispersion effectively protects the painted wall against soaking.
- BIO PROTECTION – creates unfavorable conditions for fungi and algae growth due to low water absorption and acid-alkaline reaction.
- Forms surface resistant to dirt – the paint surface is microscopically smooth, therefore particles of dirt, algae and fungi spores easily
- lose contact with and are naturally removed by rain and wind.
- Water vapour permeability – the paint surface forms a microscopic (so-called “breathing”) structure providing free transfer of water vapour through the painted surface.
- Weather Resistant – resistant to changeable atmospheric conditions and aggressive environments. A unique binders combination – paint combines the advantages of silicate and dispersion paints, high elasticity, perfect water vapour permeability, low absorptiveness and good resistance to abrasion.
- Wide choice of colours – 400 colours available (SAH Colour Scheme for Renders and Paints)
- Elasticity – high resistance to cracks and scratches owing to compensation of strains resulting from
- different thermal expansion of substrate layers.
- Recommended upon fresh renders – painting thin-coat mineral renders 5 days after their application.
- Application in low temperature (from 0°C) and high humidity (above 80%) – after adding ATLAS ESKIMO agent.
- Does not require a primer – the first paint coat primes the substrate (refers to fresh renders).
Consumption:
Consumption depends on e.g. substrate’s absorptiveness and texture, we strongly recommend estimating true consumption after the test patch. Estimated consumption based on most common substrates:
mineral thin coat renders 4 m²/L
1.5mm renders in buckets 5 m²/L
smooth renders 7-8 m²/L
Despite every effort to provide accurate images of each product’s colour and texture, actual colours and texture may vary.
We strongly recommend visiting our showroom to view samples of renders and paints. Tinted renders and paints are considered customised products and are non-returnable and non-exchangeable.
