Shop
Diamento 3D Luna Decorative Paint Fox Dekorator [5m2] 1L
£40.90- effect of shimmering diamonds with a metallic background
- high yield, high coverage – only one coat needed
- structural paint – adds texture to the wall/ceiling
- great for feature walls and media walls
- washable
- fast-drying
[25kg] Atlas SILICONE Render (Top Coat)
£59.99Thin-coat silicone render.
Specification:
- hydrophobic, self-cleaning
- breathable
- algae-resistant
- highly resistant to the UV
- very wide range of colours, including very dark or saturated tones
- flexible, reinforced with fibres
- dark and saturated colours (III colour group) may be used on a large surface
- 480 colours (tinting at extra charge)
[50mm] EPS Graphite Polystyrene 1200x600mm 0.72m2
£5.60- Thermal Conductivity: λ 0.032 W/mK
- R-value: 1.56 m2K/W
- For external insulation
- Buildings up to 25m high
- Recommended for traditional, passive and energy efficient buildings
- Can be fitted onto horizontal surfaces if they’re protected from the weather.
- For insulating external walls – regardless if the current surface is a brick, stone, block, painted or rendered surface.
- Fire class: E
[25kg] Hoter U Base Coat Atlas (formerly KT55)
£14.90the adhesive base coat for EPS polystyrene, XPS and mesh
- high adhesion
- increased durability thanks to microfibres
- crack-resistant
- max. tile size when using tiles on top of EWI – 60x60cm
[53mm] Base Track for polystyrene 2.5m Starting Edge
£7.80For EWI systems with polystyrene and mineral wool. Used as a bottom guide and protection for the insulation boards. The base track is used as a reinforcement and a separator between the damp course and the upper wall.
Size 53mm fits the 50mm boards.
[110mm] Polystyrene Fixing Metal Pin LGX-10
£0.24A hammer-in fixing with a short expansion zone.
A universal polystyrene and mineral wool fixing.
Diameter: 10mm
[150gsm] Fiberglass Mesh Atlas Roll 55m2
£64.00Specification:
- weight 150 (-3/+10%) g/m2
- resistant to alkaline enviroment
- durable
- flexible
Velur Alaska Fox Dekorator [4.5m2] 5kg + Colours
£74.90 – £81.80Velur is a specialist plaster based on acrylic resin, with a very hard, fine aggregate. The plaster is tough, crack resistant and washable (no need to seal it).
Colour: Alaska is off-white, suitable for tinting with pigments (recommended 1 tube 40ml concentrate for 1 bucket 5kg). You can add more or less depending on the planned final colour. When you order Alaska, you’ll get a base only. When you order other colours you’ll receive an Alaska base and one tube of the chosen colour which is enough to achieve the colour shown.
PLEASE NOTE that this effect is metallic. The colour will appear lighter in a bright room and darker in a dark corner.
5kg ≈ 4.5m2
Concrete Effect Plaster Fox Dekorator [6m2] 10kg
£108.00Concrete plaster forms exclusive, structural decorative coating imitating concrete boards yet is completely cement-free. It’s a plaster based on natural binders and fillers, resistant to bacteria and fungi. It assures water vapour permeability – the walls “breathe”.
10kg ≈ 6m2
Lime Travertine Fine Grain Fox Dekorator [8m2] 10kg
£108.00Travertine forms exclusive, structural decorative coating imitating stone with characteristic scores and gaps. It’s a plaster based on natural binders and fillers, resistant to bacteria and fungi. It assures water vapour permeability – the walls “breathe”.
Place of use: walls and ceilings indoors
Types of substrate: plaster, concrete, stone, plasterboards, wood-like boards and any other sound, clean and appropriately prepared substrate
Colour: off-white, suitable for tinting with pigments
10kg ≈ 8m2
Moss Effect Fox Dekorator [3.5m2] set
£112.00The moss effect gives the ability to create a unique wall imitating moss on the wall. It gently reflects the light to give the effect of droplets of water on forest moss. Especially recommended for houses, offices, shopping malls etc.
Venetian Plaster Stucco Fox Dekorator [16m2] 8kg
£96.00CLASSIC STUCCO forms exclusive decorative coating coming back to antique techniques of decorating. It’s instantly recognizable by its high gloss finish and marble-like appearance.
Place of use: walls and ceilings indoors
Types of substrate: plaster, concrete, stone, plasterboards and any other sound, clean and appropriately prepared substrate
Colour: white, suitable for tinting with pigments