ATLAS ESKIMO G setting accelerator 0.25kg

The product contains accelerators for the setting of polymeric binders in ATLAS renders.

• 2x faster setting of renders, 3x faster early resistance to precipitation – compared to renders setting without additives at 2 °C and 80% relative humidity.
  – achieving early resistance to light rainfall.
  – accelerating the setting process of renders at reduced temperatures and high relative humidity,
  The action of the ATLAS ESKIMO G additive is to initiate the preliminary cross-linking of the polymer already at the early stage of water evaporation. This results in:

• Under such thermo-humidity conditions, these parameters are respectively:

• – setting time: approx. 16 hours,

• – early resistance to rain: after 5 hours

• Application of the renders is possible when the temperature of the substrate and the air is above 0 °C a drop in temperature below zero can take place after the render has set completely, i.e. at the earliest 18 hours after its application has been completed.

ATLAS ESKIMO G is dedicated to the following ATLAS renders:

• – ATLAS SILICONE-SILICATE RENDER,

• – ATLAS SILICONE RENDER,

• – ATLAS SILICONE HYBRID RENDER,

• – ATLAS SILKON BA.

• Easy to use – it is a ready-to-use liquid render additive, added immediately before application.

• It is neutral to the other properties of the material – it does not reduce the strength of the material or degrade its performance once it has set.

ATLAS ESKIMO G is a colourless liquid with a slightly perceptible ammonia smell.