Woder E Fast-Drying Liquid Foil Membrane 5kg Atlas

Main properties:

• Dries quickly – allows another coat to be applied after 1 hour, and ceramic cladding after just one hour:
  – 2 hours for damp proofing (walls in bathrooms and kitchens),
  – 4 hours for waterproofing (floors in bathrooms and kitchens, balconies).
• It has a high elasticity – it can be used on substrates made with underfloor and wall heating systems and other surfaces subject to deformation.
• Resistant to crack formation in the substrate – maximum crack width at which no damage occurs > 3.5 mm – thanks to special polymers, the waterproofing will remain tight even if the substrate underneath cracks.
• It has high adhesion to typical building substrates – e.g. concrete approx. 2,2 MPa.
• It is frost resistant – it does not lose its properties even if it pass-es the freeze-thaw cycle repeatedly.
• Resistant to UV, frost and ageing.
• Seamless material – without the need for overlaps and special joints, as is the case with rolls.
• Allows application over a wide range of substrate and ambient temperatures – from 5 to 30 °C.
• Easy to apply – it only requires the contents of the pack to be stirred before use. It is easily applied to plasterboard, OSB as well as cement or gypsum plaster, metal and PVC components.
• Allows gradual consumption over a 12-month period – despite opening the bucket and using part of it, it gives you the opportunity to apply the remaining product over the entire shelf life, i.e. 12 months from the date of manufacture.
• Allows easy control of the thickness of the layer applied – whether applied manually or by machine.
• It sets practically without shrinkage – linear shrinkage is kept to a minimum – no shrinkage cracks appear during drying.
• ATLAS FAST DRYING LIQUID FOIL WODER E is produced as a ready-to-use compound based on polymer dispersions, fillers and modifying agents.

Innovative Technology
ATLAS fast-drying liquid foil WODER E is a modern material whose formulation consists exclusively of the highest-quality water-dilutable copolymer dispersions, along with carefully selected fillers and additives. The meticulously selected proportions ensure optimum performance of the finished coating, creating a waterproof material commonly referred to as fast-drying liquid foil. Its use with additional products in the form of sealing tapes and special flanges makes it possible to achieve a 100 % watertight coating even on complex surfaces.

Consumption
Consumption depends on intended use:
– water resist layer 1.0 kg/m²,
– waterproof layer min. 2,0 kg/m².