[25kg] Hoter U Base Coat Atlas (formerly KT55)

Description:
For glueing the insulation EPS (white and graphite) and XPS boards and as a base coat for mesh reinforcement (as described in Atlas ETICS specification).
Maximum polystyrene thickness 500mm.
Maximum XPS thickness 200mm.
Recommended for passive and energy-efficient buildings.
Hoter U is a part of Atlas’ EWI system and can be used in newbuilds as well as on existing buildings that undergo thermo modernisation.

Main properties:

• Very strong adhesion – due to its increased polymer dispersion content, it exhibits high adhesion to mineral substrates and to EPS and XPS boards. This parameter is also favourably influenced by the varied density of the aggregate.
• Resistant to cracking – thanks to the structural fibre reinforcement, the mortar has increased resistance to:
  – formation of micro-cracks in the initial setting stage,
  – the formation of cracks during at later stages.
• breathable
• recommended coat thickness: 2-5 mm

Consumption:
Average for fitting boards: from 4,0 to 5,0 kg/m².
Mesh reinforcing layer average: from 3,0 to 3,5 kg/m².
The exact consumption will vary, please estimate the consumption based on a sample.