[1L] Uni-Grunt Primer Atlas

Description:

• Reinforces the top part of primed mineral substrates – penetrates into material structure, reinforces it and improves its load-bear capacity.
• Improves yield of paints, top finishes and adhesives – increases yield of materials used for the next layer, reduces their consumption by sealing structure of a primed substrate.
• Decreases substrate absorptivity – prevents excessive water absorption by the substrate.
• Unifies substrate absorptivity – product applied as the next layer has uniform setting conditions on the whole surface, including areas with small repairs.
• Bonds non-stable substrates – reduces dust on floors, screeds and plasters.
• Intended for application at high temperature – recommended for use at temperature from 5°C up to 30°C, indoors and outdoors.

Main properties:

• ATLAS UNI-GRUNT is a water-based primer with the finest quality dispersion of polymer resins.
• Very short drying time – depending on temperature and air humidity, application of next layers on a primed substrate is possible after:
  – around 15 minutes – when using ATLAS adhesives,
  – around 2 hours – self-levelling subfloors, paint on blocks and traditional lime-cement plasters
• A very low VOC (volatile organic compound) contents, 15 times less than the norm
• colourless, solventless, water-based
• application by brush, roller or paint aggregate machine
• application temperature: from +5 °C to +30 °C
• drying time: 15 min / 2 godziny

Consumption: