Description:
- Increase waterproofing around areas where the use of ATLAS WODER waterproofing alone is not sufficient protection against moisture – especially in the corners of wet and damp areas, along wall-floor junctions, along the course of expansion joints (including construction joints) and work gaps.
- Type of substrates to be sealed – cement, cement-lime and gypsum plasters, cement and anhydrite screeds, concrete, reinforced concrete and brick, hollow block and block masonry elements, plasterboard, OSB, etc. (bathrooms, kitchens, balconies, cellars)
Main properties:
- ATLAS HYDROBAND 3G consists of three layers:
– two outer, made of alkali-resistant, non-woven polypropylene (High chemical resistance to aggressive environments – to alkalis and diluted acids.)
– centre, made of an ageing-resistant, thermoplastic elastomer.
- This arrangement of layers ensures reliable sealing and optimal adhesion of the tape to the waterproofing.
- considerable deformation, making it ideal for sealing the joints of two structural elements that are in contact with each other but work differently, e.g. wall and floor connection.
- High tear strength – thanks to the use of highly resistant materials: polypropylene knitted fabric and thermoplastic elastomer.
- Use with:
– ATLAS WODER E,
– ATLAS QUICK DRYING LIQUID MEMBRANE,
– ATLAS WODER DUO,
– ATLAS WODER DUO EXPRESS,
– ATLAS WODER S,
– ATLAS WODER SX.
Parameters:
Overall thickness – approx. 0.7 mm
temperature resistance – from -30° C to + 90° C
maximum internal rupture pressure – 1.5 bar
UV resistance – up to 500h