Description:
- ATLAS ATUT is a general-use C1T adhesive for tiles for simple tiling works on standard substrates. A wide range of layer depth 2-10 mm allows for cladding fixing on uneven surfaces and for levelling of mineral surfaces. It can be successfully used for local tile replacement.
Main properties:
- ATLAS ATUT is produced as a dry mixture of the highest quality cement binder, aggregates and specially selected modifying agents.
- Thanks to its improved formulation, the product provides:
a wide range of adhesive layer thicknesses (2-10 mm), and therefore allows thin-layer adhesion of the cladding even on uneven substrates and makes it possible to level mineral substrates,
– lowered run-off – making it possible to install ceramics from the top of the wall and avoids cutting tiles on the exposed wall surface.
Main characteristics:
application temperature: from +5 °C to +25 °C
Pot life after mixing 4 hours
grouting: after 24h
Consumption:
The values below will be true only on correctly prepared, even substrate. If the substrate is highly textured the consumption will increase. When using the combination tiling method the consumption will increase significantly.
Average consumption:
- Mosaic tiles 2x2cm fitted on the wall, trowel notch 4mm, 1.7 kg/m2
- Tiles 25x40cm fitted on the wall, trowel notch 6mm, 2.2 kg/m2
- Tiles 30x30cm fitted on the floor, trowel notch 8mm, 2.9 kg/m2
