Description:
ATLAS ATUT is a general-use C1T adhesive for tiles for simple tiling works on standard substrates. A wide range of layer depth 2-10 mm allows for cladding fixing on uneven surfaces and for levelling of mineral surfaces. It can be successfully used for local tile replacement.
Main properties:
- ATLAS ATUT is produced as a dry mixture of the highest quality cement binder, aggregates and specially selected modifying agents.
- Thanks to its improved formulation, the product provides:
– a wide range of adhesive layer thicknesses (2-10 mm), and therefore allows thin-layer adhesion of the cladding even on uneven substrates and makes it possible to level mineral substrates,
– lowered run-off – making it possible to install ceramics from the top of the wall and avoids cutting tiles on the exposed wall surface.
Main characteristics:
application temperature: from +5 °C to +25 °C
Pot life after mixing 4 hours
grouting: after 24h
Consumption
Average consumption is based on application on a straight flat substrate If the substrate is highly textured the consumption will increase. When using the combination tiling method the consumption will increase significantly.
Average consumption:
- Mosaic tiles 2x2cm fitted on the wall, trowel notch 4mm, 1.7 kg/m2
- Tiles 25x40cm fitted on the wall, trowel notch 6mm, 2.2 kg/m2
- Tiles 30x30cm fitted on the floor, trowel notch 8mm, 2.9 kg/m2
