DOORS, INTERNAL DOORS, NATURAL VENEER DOORS, Porta

Nature OSLO

PRICE LIST

EXCL VAT | INCL VAT

prices for a doof leaf, frames sold separately

models Natural Oak
Veneer
Natural Oak
Satin (white)
1, 2, 3 395,84 | 475 438,34| 526

Get in touch to order:
Sheffield: 0114 247 1468
Birmingham: 0121 360 5384
Northampton: 0160 463 3383
We are happy to advise and help you choose the best doors for you.

Colours

Natural Oak Satin
Natural Oak

decorative milling close up
– visible texture of Natural oak

TECHNICAL INFORMATION

DOOR LEAF CONSTRUCTION

Core – stabilising infill reinforced with rails and
stiles The whole is covered with a board covered with high quality Natural veneer. The door leaf surface is protected by ecological water-based varnishes. Hollow chipboard core available at an extra charge.

ACCESSORIES INCLUDED IN THE DOOR LEAF PRICE

  • Rebated doors: two or three barrel hinges standard or PRIME; non-rebated: two 3D hinges
  • Lock with silver or golden glossy plate: key lock, WC lock, or cylinder lock
  • Round pull handle (for sliding doors)
  • Preparation for shortening (maximum 60 mm)

DOOR FRAMES

Recommended rebated door frames:

  • PORTA SYSTEM
  • MINIMAX

Rekomendowane ościeżnice bezprzylgowe:

  • PORTA SYSTEM ELEGANCE
  • PORTA SYSTEM ELEGANCE 90 degrees

Recommended door frames with reversed rebate:

– PORTA SYSTEM with a reversed rebate

EXTRA CHARGES

  • reversed rebate – extra charge to a door leaf price 56.67 | 68
  • reversed rebate – third 3D hinge, white, black (extra charge to a door frame price) 60 | 72
  • reversed rebate – third 3D hinge, silver (extra charge to a door frame price) 51.67 | 62
  • an oblong pull handle for sliding doors 22.5 | 27
  • hook lock with side pull handles (sliding doors) 47.5 | 57
  • ventilation undercut 10|12
  • size ‘100’ 14.17 | 17
  • third 3D hinge- silver, white, black (extra charge added to a door frame price) 30 | 36
  • third 3D hinge – gold (extra charge added to door frame price) 35 | 42
  • hollow chipboard core 31.67 | 38
  • door leaf height 220 cm 48.33 | 58
  • reinforcement for door closer – third hinge is required 7.5 | 9
  • black lock and black barrel hinges 5.84 | 7
  • black magnetic lock and black barrel hinges 17.5 | 21
  • magnetic lock: white, black on non-rebated doors. 17.5| 21
  • magnetic lock with stainless steel faceplate 13.34 | 16
  • gold 3D hinges (extra charge added to a door frame price) 15.84 | 19
  • handle with an escutcheon

NOTES

  • Norm PN EN 14351-2:2018-12.
  • Height ‚220’: core – hollow chipboard; 3 hinges as a standard
  • Magnetic lock is not available for a double door
  • Reinforcement for door closer requires third hinge.
  • Size ‘100’ requires a third hinge.
  • PRIME or 3D hinges – packed with a door frame.

Veneer

Due to the characteristic of Natural veneers, differences in colour and graining, might appear on a door leaf. These differences cannot be grounds for complaints.

Door dimensions tables in CN standard

Oscieznica
Porta System CN
Ss Hs Ds S0 H0 Os Ow Sb Hb Sz(6) Sz(8) Hz(6)/(8) Ts/w
60 648 1985 40 685 2015 606 1971 650 1993 750 790 2043/2063 +20 / +10
70 748 1985 40 785 2015 706 1971 750 1993 850 890 2043/2063 +20 / +10
80 848 1985 40 885 2015 806 1971 850 1993 950 990 2043/2063 +20 / +10
90 948 1985 40 985 2015 906 1971 950 1993 1050 1090 2043/2063 +20 / +10
100 1048 1985 40 1085 2015 1006 1971 1050 1993 1150 1190 2043/2063 +20 / +10
  • SS total door leaf width (including rebates)
  • HS total door leaf height (including rebate)
  • DS door leaf thickness
  • S0 width of a wall opening prepared for installation
  • H0 height of a wall opening prepared for installation, measured from fi nished fl oor level
  • OS opening width (for Alfa and Beta this dimension is decreased by the door leaf thickness)
  • OW opening height (measured from fi nished fl oor level)
  • SB door frame width without architraves
  • HB door frame height, without architraves
  • SZ total door frame width with architraves
  • HZ total height of door frame, including architraves
  • MS width of sliding door masking system
  • MG thickness of a rail cover (sliding systems)
  • BG thickness of a door stop (jamb) (sliding systems)
  • TS/W acceptable width and height tolerance (wall opening)