USE
CEKOL GS-200 is used for smoothing and levelling walls and ceilings. Allows to obtain smooth surface ready for paint.
CHARACTERISTICS
CEKOL GS-200 is a mixture of gypsum, mineral fillers, and modifying agents. CEKOL GS-200 is non-toxic and eco friendly. Thanks to its composition the texture is excellent and the skim is easy to apply.
- Mixing ratio: 1 kg of the powder into approx. 0.4 litre of water
- Pot life: 60 minutes
- Consumption: approx 1,5 kg/m²/mm
- Layer thickness: 1 to 5 mm
- Ambient application temperature :+5 °C to +25°C
- Initial bonding: ≥ 60 min
SUBSTRATE PREPARATION
Adheres well to concrete, brick, blocks and plasterboards (primed when necessary). The substrate should be clean, tight and free of grease. Steel elements should be treated before contact with the plaster. Using a spatula, remove the remains of emulsion and oil paints, and loose grains of sand. Highly absorptive substrates should be primed with a deep penetrating primer.
PLASTERING
Prepare the mortar by pouring 1 kg of the powder into approx. 0.4 litre of water and mix thoroughly. The mortar should be used within 60 minutes. Apply the product in an even layer no thicker than 5mm. Use stainless steel or plastic tools. After hardening the surface is sandable. Painting or wallpapering can be started when the surface is fully dry.
STORAGE
Keep in the original packaging in a dry and dark place, away from sources of heat. Protect from excessive temperature and frost.
