Description:
Plasterboard jointing – no need for additional reinforcement in the form of tapes in the case of boards with pre-shaped edges
Repairs of wall and ceiling surfaces – recommended for gypsum substrates, for local repairs of gypsum plasters, top finishes or plasterboards.
Main properties:
ATLAS STONER is produced as a gypsum-based dry mix modified with polymers and cellulose fibres.
- Reinforced with fibres – fibres improve water retention, making the mortar easier to mix and distribute; once set, they reinforce and thicken the structure of the hardened gypsum, increasing its resistance to possible cracking.
- Plasticity – it is easy and very convenient to apply, both when inserting between plasterboards and when smoothing and profiling the surface.
- Increased strength – provides a permanent, sufficiently strong and flexible joint between plasterboards
- Low shrinkage during setting – the lack of internal stresses arising in the gypsum layer ensures high stability of the resulting joint.
- Long pot life when mixed with water – 60 minutes.
Main characteristics:
- min. / max layer thickness: 2 mm / 15 mm
- temperature of substrate and ambience during application: from +5 °C to +30 °C
- max. humidity level: 70%
- Pot life after mixing 60 minutes
Consumption:
Average consumption: 0,5 kg per 1 lm Consumption depends on the layer thickness and the size of the area.